Freedom Racing

Call Us 641-784-TOOL (8665)
or Toll Free 866-700-7572

7am - 6pm Mon-Thu | 7am - 5pm Fri

ALL HOURS ARE CENTRAL TIME ZONE

Cart 0

In-Vehicle Injector Sleeve/Cup/Tube Remover AM-ZTSE4643-IV

ZTSE4643 In-Vehicle Injector Nozzle-Cup-Sleeve-Tube Remover Tool Alt ST-252-B Stallion

Applications: DT466E DT570E, HT570, Maxxforce DT 9 & 10

Use this tool for 24 Valve (4 per cylinder) engines with ELECTRONIC injection.
Use ST-182 tool for 12 Valve (2 per cylinder) engines with ELECTRONIC injection.
Use WT530MPD for 12 Valve (2 per cylinder) engines with MECHANICAL injection.

This tool works with the following cups. 1841095C1

Used with 303-DS110 Injector Bore Brush Set, C54925 1"-8 Tap, and ST-253 Cup Installer

Supersedes AM-ZTSE4643-IV

If you already have aftermarket injector sleeves installed, it is possible that no remover will get them out and you'll have to pull the head. This is not a tooling issue and we won't accept returns after you've attempted to use the tool. This aftermarket tool uses the exact same tap that the OEM tool did before it was discontinued. The reason for the potential issue is that some aftermarket cups have thinner sidewalls so the tap can't get enough bite. You can't simply use a bigger tap because the sidewalls of some aftermarket cups are so thin that you could cut into the head on accident.

*On 4/13/21 this superseded from ST-S924 and the threads changed to 1"-8.

Stallion Products are widely considered the most heavy duty on the market! This is a high-quality tool and you will be pleased with your purchase. Don't try to save a few bucks at the expense of your engine - know that you're getting quality from Stallion Products.