EGR Cooler Test Adapter Tool 17MM EN-48974-15 U

SKU# EN-48974-15 U

California Residents: Warning

Be the first to review this product

Reward Points You will earn 2 dollars off your next purchase for purchasing this product.

Item Condition: used

Out of stock

Not sure if this is what you need? Give us a call and we'll look it up for free if you purchase the tools or parts from us!

 EGR Cooler Test Adapter Tool 17MM EN-48974-15 U

EN-48974-15 EGR Cooler Pressure Tester Adapter (6HK1 - 17 mm hose) is used along with J-46091-1 Pressure Regulator Assembly to test the EGR cooler for leaks between the coolant side and the exhaust side. The cooling system is drained, and the hoses removed from the EGR cooler inlet and outlet. The pressure adapter from EN-48974-15 is attached to the EGR cooler on either the inlet or outlet, and the other end is plugged using the supplied cap. With the regulator completely open, J-46091-1 is attached to shop air, and the regulator gradually turned until 15 psi is reached. The valve on J-46091-1 is closed, and the system is left. Pressure should be maintained for at least 15 minutes, with minimal pressure drop. Any significant pressure drop indicates the EGR cooler is leaking.

Used along with J-46091-1 

Manufacturer SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Brand SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Storage Code ZW-46

Warning: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Terms and Conditions

I understand that I'm about to purchase a Pre-Owned/Inspected tool. These are typically obtained from dealerships that close. Each piece has been hand-inspected by one of our in-house techs. These are guaranteed to be fully functional. If you'd prefer to purchase a new tool, you can look at the right side of this page to see if we have any available.